LiFu Hoisting Co., Ltd. produces national standard safety nets, national standard safety protection nets, national standard building safety nets, and national standard flame retardant safety nets

A safety net is a device used to prevent people or objects from falling, or to avoid or reduce falling and impact injuries.  

A safety net is generally composed of a net body, edge ropes, tie ropes, etc.

Safety nets are divided into safety flat nets, safety vertical nets, and dense mesh safety nets according to their functions

Horizontal safety net is a safety net installed on a plane that is not perpendicular to the horizontal plane, used to prevent people or objects from falling, or to avoid or reduce falling and impact injuries. It is commonly referred to as a flat net.

Vertical safety net is a safety net installed perpendicular to the horizontal plane to prevent people or objects from falling, or to avoid or reduce falling and impact injuries. It is commonly referred to as a vertical safety net.

The product classification is represented by the letter P for flat mesh and the letter L for vertical mesh;

The product specifications and dimensions are expressed in width x length, with units in meters;

Flame retardant mesh should be labeled with the word "flame retardant" after the classification mark.

Example 1: A flat mesh made of nylon with a width of 3m and a length of 6m is represented as: Nylon P3 × 6;

Example 2: A flame-retardant vertical net with a width of 1.5 meters and a length of 6 meters, made of vinylon material, is represented as: vinylon L-1.5 × 6 flame-retardant

The ropes of the flat (upright) net should be firmly connected to the net body, and each rope should be evenly distributed along the edge of the net. The distance between adjacent ropes should not exceed 75 cm, and the length of the rope should not be less than 80 cm. When the tendon rope is lengthened and used as a rope, the rope part must be lengthened, and after being tied tightly to the edge rope, it should be folded back and tied tightly to form at least two strands.

Requirements for the breaking strength of flat (vertical) mesh ropes

Net category, rope category, rope breaking strength requirement/N

Safety net edge rope ≥ 7000

Net rope ≥ 3000

Rope ≤ 3000

Safety net edge rope ≥ 3000

Net rope ≥ 2000

Rope ≤ 3000

Requirements for impact resistance of flat (vertical) mesh

Security Net Category: Flat Net, Vertical Net

Impact height 7 m 2 m

The test results show that the net rope, edge rope, and tie rope should not break, and the test weight should not touch the ground. The net rope, edge rope, and tie rope should not break, and the test weight should not touch the ground.